Zoom
Porto chair made with stainless steel and epoxy/wood back. Each new product is produced
from different wood slabs for back wood / epoxy part. Therefore, the color, textures, and
curves of wood used in the product can be changed. Chair body has been made by stainless steel and it can be coated Titanium Gold, Copper or Bronze pvd as options.Legnor Furniture is one of the exclusive designers and producers of luxury handmade furniture.
Overall Width: W 55 cm ( 21.65" )
Overall Depth: D 60 cm ( 23.60" )
Overall Height: H 77 cm ( 30,30”" )
Support For Table Top Shape Decision
Support For Table Top Edge Decision
Support For Cleaning & Caring
Avoid scratching with hard objects such as a knife, forks, penknife, etc...
Avoid the product from the direct sunlight or hot places.
While cleaning, use a soft microfiber cloth with AC cleaning organic products and dry afterward.
Do not use any chemical products made for the kitchen on the epoxy, wood and metal parts. (you can get the specialized cleaning products for the different parts from Arditi Collection.)
Avoid putting hot objects such as tea, coffee direct to the epoxy surface of the furniture. Use a coaster.
If you scratch your product or have a different problem with your product, you can directly reach and send us the pictures of the furniture to info@Legnor.com.
While cleaning, use a soft microfiber cloth with AC cleaning organic products and dry afterward.
Do not use any chemical products made for the kitchen on the epoxy, wood and metal parts. (you can get the specialized cleaning products for the different parts from Arditi Collection.)
Avoid putting hot objects such as tea, coffee direct to the epoxy surface of the furniture. Use a coaster.
If you scratch your product or have a different problem with your product, you can directly reach and send us the pictures of the furniture to info@Legnor.com.
Resin is a beautiful, durable substance used to make plumbing products such as sinks and bathtubs, as a modern alternative to acrylic and cast iron. This solid, heavy material is a type of composite that is made up of finely ground stones, minerals, and acrylic, which is then fused together to create a smooth, stone-like material. Due to its makeup, resin is extremely low maintenance, and scratch removal is relatively simple.
Resin has a nonporous surface that makes it resistant to stains and discoloration. To maintain the condition of your new resin product, simply wipe the surface with a dry, soft cloth after each use. Most dirt and dust will wash off with warm water. For a more thorough cleaning, use a mild cleaner such as a gentle dish soap. Avoid any products that contain abrasives, acids, or ammonia.
Scratch Removal
Resin is an unfinished material, meaning that the appearance is the same on the surface as it is under the surface. Because of this, scratch removal is uncomplicated. Most scratches can be sanded right out rather quickly using a variety of fine-grit sandpaper.
Scratch Removal Tools & Materials:
- Warm Water
- Soft Cloth
- #800 Fine-Grit Sandpaper
- #1200 Fine-Grit Sandpaper
- Dry Towel
- Polishing Compounds
Scratch Removal Steps:
Use warm water to remove dirt and dust from the surface.
Use #800 grit sandpaper and rub in small, circular motions until the scratch is gone.
Follow with #1200 grit sandpaper and rub over the surface of the scratch to smooth and blend.
Dry with a towel.
Polish the surface with a cloth and a polishing compound. Any automobile polishing compound will suffice.
Wishlist
Wishlist is empty.
Wishlist
Compare
